Many factors go into choosing the right equipment for cleaning your floors. First, you need to determine what type of flooring you have. One type of flooring might be used throughout the building, while others may be used in specific rooms or areas.

PVC tiles, wood, tile, grout, marble, granite and vinyl, are all common types of commercial flooring.

It is important to ensure that the equipment you buy can clean this material effectively without causing any damage. Modern machines can be used on many different flooring materials.

Caring For Different Floor Types

Different flooring types require different cleaning methods. It is important not to use too harsh a brush to clean certain floors. Here’s a quick guide to what you should use for each type of flooring.


  • Before you clean, use a dust mop.
  • Use a scrubber that uses a low suds solution.

VCT (Vinyl Composition tile)

  • Use a dust mop to get rid of dirt and dust
  • Use an emulsifier solution to clean the floor in a ratio of 4:1
  • Polish your floors with a floorcare device


  • Daily dust mop or sweep with the broom
  • Use an all-purpose cleaner to mop your floors once per week.
  • Use a water-based sealant to seal once every quarter
  • Perform gloss restoration once every one to two years

Ceramic Tiles and Grout

  • Avoid using acidic cleaners, as they can cause grouting to become brittle.
  • A wet mop, scrubber machine, or disc rotary brushes can be used.


  • Vacuum daily. Dirt and debris can get trapped in matting. Use a suitable attachment.
  • Seasonally (in winter and early spring), perform a thorough clean to remove any ice melt residue. You can often see a white cloud when this is the case.
  • Apply the all-purpose cleaner in a dilute form and work it onto the surface


  • Vacuum daily or weekly (depending on traffic).

Floor Cleaning For Different Industries

You should also consider what type of commercial floor cleaning in auckland you will need. You might find dirt, oil and grease in your work environment. Particularly corners, storage cupboards, and areas with storage units will collect more dirt and grime.

Certain industries will require specific requirements. A blue-chip technology company may need “clean rooms”, which can be more complicated than you think. These rooms must be free from dust due to sensitive electronics and the need for servers to work at peak efficiency. This will require special equipment for cleaning the floors.

A machine should be able to handle multiple jobs, and it should also have the ability to perform several jobs at once. Consider whether the machine you are considering can reach corners. You can attach attachments to most equipment that reaches behind desks and storage but make sure you check before buying.

You will need to invest in specialised equipment for heavy-duty commercial usage. This may require you to purchase several machines. High-pressure jets are useful for cleaning dirt and stains from exterior walls and applying grease and oil. While a buffer is useful for polishing high-shine floors, it won’t be of much value beyond that.

It would be best if you also considered the purpose of the machine and its operation. It may not be practical to refill equipment with water regularly. You’ll have to consider the dump, fill and drying times.

Think about how quickly the equipment cleans – machines that clean quickly require less staff time and cause less disruption to other workers. This will give you more time to do other tasks.

Add Your Comment